QuickLock

The Ultimate Point Repair System

Pipe Repair

Quick Lock is a mechanical point repair system for the inside repair of pipes. There is no resin involved! The only component is a V4A stainless steel sleeve which is covered by an EPDM compression seal. Any pipe, from 6” to 32” in diameter, can be effectively repaired.

For any damaged pipes greater than 36", please check out QuickLock BIG.

The flow of the pipe system does not need to be interrupted when installing Quick Lock! The Quick Lock packer is hollow, allowing the water or sewage to flow through during installation. The Packer can be attached to the M-Series tractor and camera system.

Applications

• 
  Municipal Sewage Lines
• Well and potable water piping systems
• Pipe Cracks
• Root Control
• Leaking Joints
• Seal off unused lateral lines
• Restore structural value of pipe

Not meant for…

• Fixing collapsing pipes
• Pipes with an inner pipe pressure above 130psi
• Industrial sewage (except when corrosion levels have been inspected)

Warranty

We’re confident that Quick Lock will maintain pipe integrity for up to 50 years! RAUSCH offers a standard 50 year warranty on the materials.

The QuickLock Sleeve

The Quick Lock sleeve is made of V4A stainless steel in grade 1.4571. The sleeve maintains high corrosion resistance, meaning it functions in sewage water as well as potable water. This sleeve is the new interior of the pipe, and is the component that supports the structural integrity.

The thermosetting EPDM rubber gasket is the component that actually seals the holes or intrusions. EPDM distinguishes itself by excellent physical properties and resistance against aging, ozone, atmospheric conditions and environmental influences, alkaline and various leaches and chemicals.

Patented Locking Mechanism

Two tooth strips are punched into the left and right side of the sleeve. In each tooth strip, there is a locking and gear mechanism, guiding the sleeve sheet while being installed. After reaching maximum compression pressure, the gear is permanently locked.

The distance between tooth groove and tooth tip is one click. That means the maximum possible return stroke from tooth tip to the next lower groove may cause a maximum diameter reduction after compression of only about 0.025 inch, independent of the nominal size. Therefore, the locking mechanism operates in an almost infinitely-variable way.

Video - QuickLock: how it works

Current Certifications

QuickLock holds certifications from DIBt, Zulassung Nr. Z-42.3-374 and from WRc, number PT/283/0609.

QuickLock has already been installed by many municipalities and contractors throughout the US. Worldwide, approx. 100,000 sleeves are installed up to date.

Please feel free to download the following documents

QuickLock Specs [PDF] | QuickLock US Patent [PDF] | QuickLock Pictures [PDF]

Jetting Resistance [PDF] | WRc Assessment [PDF]

Installation Manual [PDF]